Quality sunrooms, screen rooms, porch, patio enclosures, patio rooms, carports, decks and do it yourself kits from The Leisure Store Inc.

Patio Enclosure With Aluminum Roof

A screen room, patio enclosure or gazebo will also enhance the value of your property.

We have examined the market and are pleased to present you with these high quality screen rooms. These patio rooms provide you with protection from the sun's UV rays and at the same time give you a refuge from those annoying insects. Our screen rooms are easy to assemble. Whether you choose a patio enclosure with a soft vinyl roof or an insulated aluminum roof, our patio rooms require very low maintenance.

The three sided (Patio Enclosure) patio rooms are available with either a soft vinyl or insulated aluminum roof. The advantage of the insulated aluminum roof is that your patio enclosure can remain up all year around. The roof is insulated and will reduce the amount of the sun's heat transmitted through the roof - thus keeping your screen room cooler on a hot summer's day. An insulated aluminum roof also has superior water run-off compared with a soft roof.

3 Sided Patio Enclosure with Insulated Aluminum Roof

  • Attaches to wall of house, cottage, trailer or mobile home
  • Available in many standard sizes, with custom sizes available
  • Custom sizes also available that will fill most other needs
  • Two frame colours


  • This is a screen room that will provide you with years of use and great value!
  • Extrusions that hold roof system provide additional rigidity to screen frame.
  • The insulated aluminum roof is either 3,4 or 6" thick depending on the projection and snow load.
  • Comes with aluminum extrusion fascia and gutter, supporting U Channel and posts.
  • Sturdy screen frame made of an aluminum extrusion frame with extrusion wall thickness significantly greater than cold rolled aluminum tubing.
  • Standard screen panels are 44" or 29"wide and 74" high.
  • Powder coated, baked on paint finish for better adhesion
  • Will accommodate patio room depth or projection from 7'6" all the way to 11'3"
  • The screen room is screwed down to a deck or patio
  • Sliding screen door that won't get manhandled by the kids


  • 79" high screen frames
  • Extra doors
  • Roof height at point of connection to home or trailer different than 98"
  • Extension of roof beyond end of screen room
  • Privacy or Wind Panels
    • - 1/3 panels - 3 to enclose 1 screen frame
    • - 1/3, 2/3 panels - 2 to enclose 1 screen frame

Post, Fascia Gutter Colour

Sand WHITE Earthstone Black

Screen Rooms with an Aluminum Roof Measurements

Free Standing Screen Room Optional Items

79″ High Screen Room Frames (Standard Height – 74″) get price

Additional per panel

Privacy, Wind Panel for 79″ high Screen Frames get price

Additional per panel

Screen Room Frames with 1 narrow (1 5/8″) cross mullion bar
Extra Sliding Door (Non-Round Screen Room units) at time of purchase
(This is put in the place of a Regular Screen Panel and Includes Door Frame, Sliding Door,
2 Door Tracks, Door Handles, Weatherstrip)
Operating Skylight $1,850


  • Prices subject to change before finalization of order without notice.

Screen Rooms with an Aluminum Roof Prices and Sizes- CALL FOR PRICES

Screen RoomInsulated Aluminum Roof 
Model NumberSize in Feet and InchesSizePrice
110911' 3"11' 3"11' 9" x 12' 3"
111115' 1" 11' 3"16' x 12'N/A
15087' 6"15'8' x 16'
1510.510' 15' 10' 6"x 16'
151011' 3"15' 11' 9"x 16'
151215' 1"15' 1"16' x 16'N/A
18097' 6"18' 9"8' x 19' 9"
1811.510' 18' 9"10' 6"x 19' 9:
181111' 3"18' 9"11' 9" x 19' 9"
181315" 1"18' 9"16' x 20'
22107' 6"22' 6"8' x 23' 6"
2212.510' 22' 6"10' 6" x 23' 6"
221211' 3"22' 6"11' 9" x 23' 6"
221415' 1"22' 6"16' x 24'N/A
26117' 6"26' 3"8' x 27' 3"
2613.510' 26' 3"10' 6" x 27' 3"
261311' 3"26' 3"11' 9" x 27' 3"
261515' 1"26' 3"16' x 27' 3"N/A
30127' 6"30'8' x 31'
3014.510' 30'10' 6" x 31'
301411' 3"30'11' 9" x 31'
301615' 1"30'16' x 31'N/A


  • Price of Insulated Aluminum Roof Screen Room, Patio Enclosure Conversion Do It Yourself Kit includes screen, sliding screen door and hardware, roof track (not required for home application), roof receiver, extrusion and posts to support roof, roof, facia, built-in gutter and downspout, extrusions to support gable ends and gable ends.
  • Insulated Aluminum Roof overhangs front and sides of Screen Room, Patio Enclosure, to provide more protection from water, therefore is slightly larger than Screen Room, Patio Enclosure.
  • It is assumed that the connecting wall is 8' high. Other optional heights are available.
  • Price includes all shipping and handling within continental U.S. and Canada. See details in the Shipping Policy.
  • Price subject to change without notice prior to customer finalizing order.
  • Please contact us for pricing on custom size Screen Room, Patio Enclosure Do It Yourself Kits.

Screen Rooms with an Aluminum Roof Specifications

Patio Enclosure for Soft Vinyl Roof

The ADD-A-Room Screen Room, Patio Enclosure is a three-sided room that is installed on a deck or patio and attached to your home, cottage or trailer. The screened room can be purchased with either a soft vinyl roof or an insulated aluminium roof. The Add-A-Room Screen Room, Patio Enclosure provides protection from the sun, rain and bugs and will allow you to obtain greater enjoyment from the outdoors during the summer.

There are many different colors, standard sizes and heights. Custom sizes are also available.

The following is a description of the insulated aluminium Roof Patio Enclosure.

The screen room frames are made of fully extruded aluminium. The frames are baked, powder coated paint finish and available in several colours. The frames are fully screened in fibreglass screening that has 18 x 16 threading per square inch. The screen frames have aluminium cross bar support to enhance the strength of the frame. The cross bars are painted in a manner similar to the frames themselves. Each screen frame is pre-joined to the next one using a 1″ flexible vinyl hinge. One screen door is provided, which slides on nylon wheels in a rigid black plastic track.

The screen room frames are typically or 44″ or 29″ wide depending on the size of Screen Room, Patio Enclosure ordered. Normal screen frame height is 74″ and an optional height screen frame is available.

The standard height at the high point of the Screen Room, Patio Enclosure (where it attaches to the home or trailer) is 96″ with 74″ high screen frames. This height can vary from 88″ to 116″ depending on the options ordered.

The Insulated Aluminium Roof is available in either 3″, 4.5″ or 6″ thickness. The greater the thickness of the roof, the greater strength and the higher the insulation value.

The roof is installed above the screen frames and results in a roof structure which is tight, thus being more resistant to bug entry. The Patio Enclosure may be left up all year round, when installed on a deck or patio that does not move in relation to the home or trailer to which it is attached. The Insulated Aluminium Roof has excellent water or snow run-off and can carry most normal snow loads (typically around 55 pounds per square foot). Since the roof is insulated it will cut down the amount of heat transferred from the roof in the summer time and so the Screen Room, Patio Enclosure will be cooler than with a soft vinyl roof.

Where the Screen Room, Patio Enclosure is installed under a home roof, an eaves-trough must be installed on the house to avoid significant amounts of water or snow being cast onto the Screen Room, Patio Enclosure roof from the house.

A roof track and receiver extrusion are installed to accept the roof. The screen room roof is made of one and a half pound expanded polystyrene vacuum pressed to embossed aluminium skin on both sides. The aluminium has an baked, powder coated white paint finish. The thickness of the insulated roof varies from 3″-6″ depending on the size of the roof projection and the customer’s needs. The greater the thickness of the roof , the greater strength and the higher the insulation value. The modular roof panels are joined together on site. Extrusions are provided to surround the gable end material (1 3/4″ thick insulated panels at each end of the Screen Room, Patio Enclosure to fully enclose the room). The connection to the screen room frames reduces screen frame movement in wind. The front extrusion supporting the roof is in turn supported by flutted aluminium posts (same paint finish as the roof), which are placed at every second joint in the screen room frames (approximately 90″ apart).

The screen room roof comes with a gutter for the front and fascia for the sides.

All parts are made of rust resistant aluminium except for the soft vinyl hinge connecting the screen room frames, the wheel assembly, and tracks for the sliding door.

Screen Rooms with an Insulated Aluminum Roof Warranty

*The room comes with a warranty. Additional one.

The screen room and hard roof manufacturers are known to assure many years of worry free use of its products and uses quality material in their manufacturing.

1Year Guarantee on Structure

1-year guarantee against manufacturing defects. Should a problem occur during this period, the faulty part will be replaced or repaired (according to the conditions stipulated below) by the manufacturer.

Guarantee on all Faulty Manufacturing

The manufacturer guarantees fault free parts and labour for a period of 1 year from the receipt of the purchase. Should a fault occur during this period, the faulty part will be repaired or replaced (according to the conditions stipulated below) to the discretion of the manufacturer.


If a fault occurs during the guarantee period the manufacturer will repair or replace the faulty part at its discretion.This repair or replacement to the defective item, added parts or ties; including transport charges and installation charges will be excluded. This offer is valid only if, in the opinion of the manufacturer this fault is not a result of abuse, negligence, poor installation, maintenance, freeze or unauthorized repairs for modification. These guarantees are offered only to the original purchaser and are not transferable to subsequent owners or on pieces repaired or replaced. The original purchaser must return the completed guarantee form included with the product to the manufacturer within the 10 days following receipt of the purchase in order to be registered. The manufacturers responsibility is limited to the repair or replacement of the faulty part and doesn’t include loss of use, inconvenience, nor damages or similar consequences.

Guarantee Claim Procedure

The original purchaser must advise the manufacturer in writing (along with pictures) of the date where the fault was noticed within 10 days so that the manufacturer can have the opportunity to verify if the claim is justifiable and at what point the repair or replacement can be done.

Roof Pitch of Screen Rooms with an Aluminum Roof

Calculation of minimum roof slope requirements for an Insulated Aluminium Roof Patio Enclosure Screen Room, Patio Enclosure.

The normal screen frame height (B) is 74″. If the people using the Screen Room, Patio Enclosure are tall, one may wish to consider purchasing the optional height screen frames. In order to have proper water run-off from the roof a minimum slope is required. This slope is determined by a combination of the height of the screen frames and the projection of the Screen Room, Patio Enclosure. Projection is the distance one would walk away from the house or trailer to which the Screen Room, Patio Enclosure is attached.


Screen Rooms with an Aluminum Roof Snow Load

2 Pound Foam Panel

Panel Size Deflection Limit Live Load
  21 31 42 49 52 62
4″ panel – 2’Mullion Spacing L/175 15 13 12 11 11 10
4″ panel – 4’Mullion Spacing L/175 15 13 11 11 11 10
6″ panel – 2’Mullion Spacing L/175 21 18 16 15 15 14
6″ panel – 4’Mullion Spacing L/175 19 17 15 14 14 13

1 Pound Foam Panel

Panel Size Deflection Limit Live Load
  21 31 42 49 52 62
3″ panel – 4’Mullion Spacing L/180-L/240 11 10 9 8 8 7
4″ panel – 4’Mullion Spacing L/180-L/240 13 11 10 9 9 8
6″ panel – 4’Mullion Spacing L/180-L/240 15 15 14 12 11 10

Maximum roof span with 0.3 metre eave protection.

  1. Dead Load included in Span Table DL=0.15 kPa
  2. Live Load values are unfactored
  3. Tabulated spans include 0.305m eave projection and do not apply for simple span
  4. Aluminum to CAN3-S157-M83 Alloy 3003 H112
  5. Expanded Polystyrene insulation Type 1, 1lb/ft conforming to CAN/ULC-S701
  6. 11mm 1R24/2F16 OSB to CAN/CSA-0325.0-92 Grade O-2 Construction Sheathing
  7. Panels have been tested in accordance with CAN4-S124M (Protection of foamed plastics)and complies to OBC Clause
    • Flame Spread Rating = 5
    • Smoke Development Index = 170
  8. Roof panels are intended as an alternative to the prescriptive regulations of Part 9 of the OBC.

Refer to OBC Part 2 – Alternative Solution Document Dated March 1, 2011 for details.


We accept payment by Etransfer, PayPal, Postal, & Bank Money Orders

Our Prices are your total cost delivered to your door in continental U.S. or Canada. See Shipping Policy for details.

Authorized Dealer for

Provider of quality do it yourself kits:

Contact Us

casino malaysia minyak dagu mega888 apk pussy888 xe88 joker123 super 8 ways ultimate casino malaysia live22 malaysia mega888 apk 免费电影 online casino malaysia